Clean the control panel orOne or more of theremove the obstruction seesensors have beencovered, e. Preparing the worktop Make the worktop cut-outaccording to the dimensions given in the building-indiagram. To activate a cooking zone or the timer, touch the sensor forselecting the relevant cooking zone or the timer. These melt at high temperatures, and could catch fire. Please note that telephone calls may be monitored and recorded to improveour service. Correct use For people fitted with a heart pacemaker: Please note that the area immediately surrounding the hob is electromagnetically charged. Disposal of your old appliance Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment.
Check that the hob works. When contacting Miele, please quote the model and serial number of yourappliance. There is a danger of burning until the residual heat indicators go out. Do not use the hob if it is faulty, or if the ceramic surface is cracked, chipped or damaged in any way. Space in which to stick the extra data plate supplied with the appliance. Ensure that the model number is the same as the one on the front of these instructions.
Make sure that there isnothing covering the sensorsor the hob. ~ The veneer or laminate coatings ofworktops or adjacent kitchen units must be treated with 100 °Cheat-resistant adhesive which will notdissolve or distort. The operation of the cooker hood is automatically controlledby the operating status of the hob. Pans that have boiled dry can cause damage to the ceramic surface for which the manufacturer cannot be held liable. It is only completely isolated from the electricity supply when: — the mains fuse is disconnected, or — the screw-outfuse is removed in countries where this is applicable , or — it is switched off at the wall socket and the plug is withdrawn from the socket, or it is switched off at the isolator.
When doing this, make sure that the seal under the hob sits flush with the worktop on all sides. The appliance is supplied for connection to a 230-240V, 50 Hz supply with a 3-corecable. Do not apply cleaner whilstthe hob is still hot, as this could result in marking. RemedyMake sure that there is nodirect light from the sun orfrom an artificial source falling onto the hob and thatthe surrounding area is nottoo dark. They are not harmful and do not indicate a faulty connection or appliance. Therefore, when cooking or reheating food such as poultry, it is particularly important that the food is completely cooked through. This data must correspond in order to avoid the risk of damage to the appliance.
Grains of salt, sugar and sand e. These do not guarantee the required safety of the appliance e. The cooking zone itself is heated up indirectly by the heat given off by the pan. Any damage caused by cockroaches or other vermin will not be covered by the guarantee. If the niche cladding is made from a combustible material e. This appliance is fitted with a cooling fan. Faulty components must only be replaced by genuine Miele original spare parts.
The programme is shown in the cooking zone displays at thefront left and rear left. To safeguard against burning, keep children well away from the appliance at all times. Induction automatically recognises the size of the pan, i. To help you get themost from your appliance, Miele has put together acomprehensive range of accessories and cleaning products. The 0 on the right willflash. These can be ordered via the internet at:or from Miele see back cover for contact details. Ifthe cooking zone is still hot, the residual heat indicator willthen appear in the display.
The cooking zone display will flash. If nofurther entry is made, the hob will switch itself off after a fewseconds for safety reasons. The halfhour is indicated by a dot after the number. Damp pan lids might adhere to the ceramic surface and be difficult to dislodge. The timer can be used for two different functions:— to set the minute minder— to set a cooking zone to switch off automatically. After the programming mode has been called up, P Programme and S Status will appear in the timer display.
It is approximately equal to 0. If the keeping warm function has been activated, the cookingzone will switch off automatically after a maximum of 2 hours. The smell and any vapours will dissipate after a short time. If a suitable pan is placed on the cooking zone within 3 minutes, the ß will go out and you can continue as normal. Older children may use the appliance only when its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse. Use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
Please do not therefore dispose of it with your household waste. If Stop and Go is not deactivated, the hob switches off after 1hour. Let it cool down to room temperature beforecleaning. All the cooking zones can be programmed at the same time. For particularly high performance cooking, Miele TwinBooster technology can combine the power of two separate cooking zones into a single zone. If the hob is installed behind a furniture door it may only be operated with the door open.
Not allowedb Minimum distance of 50 mmbetween the right of the worktopcut-out and the nearest piece offurniture e. Once the residues have been removed, allow the appliance to cool down, and then clean with a suitable proprietary ceramic hob cleaner. Do not connect the appliance to the mains electricity supply by a multi-socketunit or an extension lead. Whena cooking zone is switched on, this coil creates a magneticfield which impacts directly on the base of the pan and heatsit up. If this happens, ß will flash in the relevent cooking zone display alternating with the power setting selected. Take care not to burn yourself. Special hob guards are available from good retail outlets.